Two Post Car Lift

The LUXMAIN in-ground Two Post Car Lift is superior in terms of space utilization. Ordinary two-column lifts have two columns mounted on the ground in any state, severely limiting space utilization. And through the unique design, as well as strict adjustment, testing and quality inspection before leaving the factory, the synchronization of the LUXMAIN in-ground double-column car lift is guaranteed.

What should I pay attention to during the maintenance of Two Post Car Lift?

1. Pay attention to the regular maintenance. Because the personnel enter the elevator during the maintenance of the elevator, the elevator must be lifted to prevent the elevator from falling suddenly and causing casualties.

2. Check the lubrication and wear of the roller, the intermediate shaft and the bearing, the cylinder pin shaft and the bearing, the boom hinge shaft and the bearing, and must be filled with lubricating oil to extend the service life of the bearing.

3. Also pay attention to the year-end maintenance, check the hydraulic pressure and pipe connection parts, the pipe is damaged, remember to replace it immediately, and tighten the pipe joint when the connection part is loose.

4. If the Two Post Car Lift cannot be lifted or the lifting force is weak, please pay attention to the fact that the pressure regulating of the relief valve does not meet the requirements. It may be that the pressure is adjusted to the required value or because the cylinder is leaked, check or replace the cylinder assembly, the reversing valve If you are stuck or leaking, remember to check the replacement valve assembly.

Company Information：

Yantai Tonghe Precision Industry Co.,Ltd was founded in 2007, locates in Yantai City. We are a manufacturer of inground car lifts and a member of China Automobile Maintenance And Repair Equipment Trade Association.

Equipped with over 100 sets of advanced manufacturing equipments and precision inspection instruments, Yantai Tonghe dedicates in the design & development, manufacturing and services of inground lifts, hydraulic cylinder and hydraulic control system. The annual production capacity in inground car lifts reaches 10,000 sets, specialized high pressure oil cylinders reaches 40,000 pieces and hydraulic control system reaches 10,000 sets. The products are mainly car jack lift, Quick Lift, Inground Lift, etc. Our products are widely applied in Automotive Industry, Vehicle maintenance, Construction machinery etc.

FAQ：

1.How about the package of the quick lift and the capacity of one 20’container ?

The lifting frames are packaged individually in cartons and the power unit is packaged in wooden cases. Each 20-foot cabinet can hold 75 sets of equipment。

2.Can the quick lift be used on a sloped ground?

To the extent of ensuring the safety  of vehicle and operator ,Slopped ground or non-hardened ground is not recommended used

Is Luxmain quick lift can be used on glass steel grille? What is the minimum thickness of glass steel grille

Can be used on glass steel grille , but the glass steel grille can not be overhead.

Shown as below:。

3.Can the power supply of LUXMAIN  Quick Lift be 110V or 380V?

The 110V power supply can be realized by supporting the corresponding 110V power unit; for safety, the 380V power supply is not recommended.

By changing the power outlet, it can adapt to the power interface standards of all countries in the world.

4.What is  the weight of Luxmain Quick Lift? 

The single-sided lifting frame weighs approximately 42kg and is equipped with a roller that can be dragged or translated. The power unit is about 23kg.

5.What is the warranty of Luxmain Quick Lift ?

One year