With the development of the domestic auto repair industry, due to the convenience of disassembly and use of the Car Lift, especially for the maintenance of small and medium-sized cars, Post Suv Double Parking Lift has gradually replaced the "ditch" mode that was previously used to repair cars and became a car. Equipment necessary for secondary maintenance qualification in the maintenance industry.
|Model No||L-750E||Supply Voltage||AC220V|
|Frame spread length||1746mm||Mini Height||88mm|
|Frame Length||1468mm||Max.Lifting Height||460mm|
|Max.Lifting Capacity||3500kg||Single side width of lifting frame||315mm|
|Single frame weight||42kg||Power unit weight||20kg|
|rising/lowing time||20~30sec||oil tank capacity||4L|
LUXMAIN Precision Industry Co.,Ltd was founded in 2007, locates in Yantai City. We are a manufacturer of inground car lifts and a member of China Automobile Maintenance And Repair Equipment Trade Association.
Equipped with over 100 sets of advanced manufacturing equipments and precision inspection instruments, LUXMAIN dedicates in the design & development, manufacturing and services of inground lifts, hydraulic cylinder and hydraulic control system. The annual production capacity in inground car lifts reaches 10,000 sets, specialized high pressure oil cylinders reaches 40,000 pieces and hydraulic control system reaches 10,000 sets. The products are mainly car jack lift, Quick Lift, Inground Lift, etc. Our products are widely applied in Automotive Industry, Vehicle maintenance, Construction machinery etc.
Do not attempt to install this lift if you have never been trained on Post Suv Double Parking Lift installation procedures. Stay clear of any moving parts that can fall and cause injury. These instructions must be followed to insure proper installation and operation of your lift. Failure to comply with these instructions can result in serious bodily harm and void product warranty. Manufacturer will assume no liability for loss or damage of any kind, expressed or implied resulting from improper installation or use of this product.
Most of the Portable Quick Lift we have seen are fixed. The car must be lifted on the lift before lifting. There are also several successful designs for mobile lifts, such as scissor lifts and gantry lifts.
1.What is the height of high palm equipped with the quick lift ?
It can be up to 460mm equipped with rubber block ，can be up to 560mm with high palm
2.What is the temperature that he quick lift need 46# hydraulic oil? Use which hydraulic oils below this temperature?
3.Recommendation: Use 46# anti-wear hydraulic oil when the local average temperature is less than -10 °C. It is recommended to use 32# anti-wear hydraulic oil when it is less than -10 °C.
What is the motor power of the quick lift?
12V power unit needs 1600W，220Vpower unit needs 750W。
4.Can the inverter be used with the 12V or 220V quick lift? any size can be used?
5.Inverter can be used. 220V can be converted to 12V and DC transformer is available. 220V power unit needs to use 12V to become 220V inverter, and the power needs to be greater than 1.5KW. In the same way, if the generator is used to drive 220V, the power is also required to be greater than 1.5KW.
Can a quick lift make a taller lifting frames?
This product is not customized, more product models please look through official website.
+86 535 6736715
Yantai Luxmain Car Lift Co., Ltd. products include:Movable Car Lift,Electric Car Lift,Off-road Car Lift,Two Post Car Lift,Single Post Car Lift,Single Post Hydraulic Lift,Hydraulic Inground Car Lift,One Post Car Washing Lift,Hydraulic Lifter,Heavy Truck Lift,Car Lift 2 Post