Garage Hydraulic Car Washing Lift must be safe, reliable, user-friendly, and scientific maintenance is a prerequisite for safety and reliability.
Garage Hydraulic Car Washing Lift should be installed and debugged under the guidance of the manufacturer's technical personnel. Do not arbitrarily change the parts and scope of the machine during use to avoid direct or indirect damage to the machine.
|Model No||L-750E||Supply Voltage||AC220V|
|Frame spread length||1746mm||Mini Height||88mm|
|Frame Length||1468mm||Max.Lifting Height||460mm|
|Max.Lifting Capacity||3500kg||Single side width of lifting frame||315mm|
|Single frame weight||42kg||Power unit weight||20kg|
|rising/lowing time||20~30sec||oil tank capacity||4L|
LUXMAIN Precision Industry Co.,Ltd was founded in 2007, Equipped with over 100 sets of advanced manufacturing equipments and precision inspection instruments, LUXMAIN dedicates in the design & development, manufacturing and services of inground lifts, hydraulic cylinder and hydraulic control system. The annual production capacity in inground car lifts reaches 10,000 sets, specialized high pressure oil cylinders reaches 40,000 pieces and hydraulic control system reaches 10,000 sets. The products are mainly car jack lift, Quick Lift, Inground Lift, etc. Our products are widely applied in Automotive Industry, Vehicle maintenance, Construction machinery etc.
Companies keep the direction of "professional, standards ,innovation", guided by technological innovation, quality assurance as a guarantee, to provide users with safe, accurate and efficient standardized products, personalized customization.
Prepare the vehicle before lifting it. When using it, place the vehicle in the Home Car Wash Lift center and fix the board and arm to the position indicated in the repair manual. Adjust the bracket until the vehicle is level, always lock the arm, align the board lift attachment with the supported part of the vehicle, and do not let the board lift attachment extend out of the board.
Perform a safety check before lifting and lowering the lift and signal to others that the lift is about to start. Once the tire is slightly off the ground, check that the vehicle supports are suitable.
Home Hydraulic Car Washing Lift should be as far away as possible from stoves, grease, oil, garbage, dust, ammonia, alcohol, heating, faucets, obstructions, air humidifiers, thinners or spray-type adhesives.Pay attention to the timely replacement of hydraulic oil according to the season, 32# in winter, 46# in summer.
1.What is the height of high palm equipped with the quick lift ?
It can be up to 460mm equipped with rubber block ，can be up to 560mm with high palm
2.What is the temperature that he quick lift need 46# hydraulic oil? Use which hydraulic oils below this temperature?
3.Recommendation: Use 46# anti-wear hydraulic oil when the local average temperature is less than -10 °C. It is recommended to use 32# anti-wear hydraulic oil when it is less than -10 °C.
What is the motor power of the quick lift?
12V power unit needs 1600W，220Vpower unit needs 750W。
4.Can the inverter be used with the 12V or 220V quick lift? any size can be used?
5.Inverter can be used. 220V can be converted to 12V and DC transformer is available. 220V power unit needs to use 12V to become 220V inverter, and the power needs to be greater than 1.5KW. In the same way, if the generator is used to drive 220V, the power is also required to be greater than 1.5KW.
Can a quick lift make a taller lifting frames?
This product is not customized, more product models please look through official website.
+86 535 6736715
Yantai Luxmain Car Lift Co., Ltd. products include:Movable Car Lift,Electric Car Lift,Off-road Car Lift,Two Post Car Lift,Single Post Car Lift,Single Post Hydraulic Lift,Hydraulic Inground Car Lift,One Post Car Washing Lift,Hydraulic Lifter,Heavy Truck Lift,Car Lift 2 Post